Re: TT-01 Mod class for next season

FusionBrad · FusionBrad on Mon May 25, 2009 10:29 pm

i know the idea was brought up in the past, but thats when i was lying 3rd in clubstock with my tt01, club stock has changed and the level of competition has increases hugely so now its not possible thats why we bringing it up again

ototw · ototw on Mon May 25, 2009 10:33 pm

oh,enjoy

ototw · ototw on Mon May 25, 2009 10:36 pm

so mr king of the field,its what you rule that counts,thanks ,nice previous comment

FusionBrad · FusionBrad on Mon May 25, 2009 10:41 pm

but thanks for the great idea What a Face

u interested in racing tt01 mod class?

ototw · ototw on Mon May 25, 2009 10:45 pm

just as much as what you helped me with drifting,hope that answer u're question,thanks

FusionBrad · FusionBrad on Mon May 25, 2009 11:09 pm

i offered to help u many times, offer still stands, we drifting in two weeks again,i spend most of my drift evenings helping everyone. hope fully we will see you there.
anyway really enjoyed the racing sunday, the tt01 mod class definitely looks like a option for us slower guys as the club stock guys are really putting down some crazy times. so hopefully 6 guys will step forward and we can start it

JaY · JaY on Tue May 26, 2009 1:49 pm

ototw wrote:eventually another person who does not run the fast cars come with the same idea,well good luck,WOULD like to see who's gonna say what now,because when I CAME UP WITH THIS IDEA,I were convinced it too expensive too run,let see how far you get and if my posting will last a day.

ya okay.. but all i want really as a MOD class is a class that has the same rules as the stock class except the use of a black can and 3000s ( I suppose lipos can be used aswell) thats it. want to keep it simple.

FusionBrad · FusionBrad on Tue May 26, 2009 1:56 pm

i agree, but if we change to foams it will be MUCH cheaper, and we all have 25 , 55 gears, lipos will be cheaper than 3000 in the long run. the aim is to keep it cheap, competitive and a step up from tt01.

all we need is 6 volunteers to get it started

JaY · JaY on Tue May 26, 2009 2:22 pm

okay.. about the foams, doesnt it take the challenge of the drive away? cause they grip so much better? im not sure I have never driven a car on foams before and I suppose the foams last a long time hey? my dynamites (rubber) are good for 3 races including any practices then they are finished. foams much longer?

sam the man · sam the man on Tue May 26, 2009 6:59 pm

At that speed foams would probably last longer but you are going to slower as they wear down so you will keep buying new ones to keep the highest rollout, B3's are the shiz in the TT mod class, Will last a whole season of racing, practice on cheaper tyres, and your rollout stays the same. Idea

You can thank me later. Wink

Nick · Nick on Tue May 26, 2009 9:07 pm

TT 01 Mod - TT01 chassis, black can/Tamiya 23t can, limited gearing( 25 pinion 55 spur), B3's/foams, 2 door/4 door body, Tamiya hop ups, 4600mah bat/ 5200mah lipo. 1450g min weight.
What u guys think of this?

ototw · ototw on Tue May 26, 2009 9:48 pm

foams hold the car back,I.ve played with it for a while,go rubber,tt01 aint a foam car

ototw · ototw on Tue May 26, 2009 9:52 pm

and a black can ,too heavy on the gears,they strip,put a test car out for a while,I played with a johnson and foams,and 300batt,and my pinion gear took hammering,

Nick · Nick on Tue May 26, 2009 9:55 pm

Brad what do u think, u have raced with foams on a tt-01. Foams or stick with what we use in tt-01 stock..tamiya cheapies and dynamites.

ototw · ototw on Tue May 26, 2009 10:04 pm

set-up a test unit,take it to the track and run it,play with it for a few weeks,before members go and buy whats gonna end up on a shelf