Newly TT01 racers

Post new topic   Reply to topic

View previous topic View next topic Go down

Newly TT01 racers

Post  ototw on Sun May 10, 2009 9:35 pm

Remember,refer to your cars manual,it has to be looked after,service your car,clean it and check it out before the next raceday,you might need parts,check for hairline cracks which occured at a rollover or bump during previous races,its the same as the motorcar you arrived at the track,just 1:10 scale smaller,but it still need servicing.

ototw

Posts: 1763
Join date: 2008-10-12
Age: 45

View user profile

Back to top Go down

Re: Newly TT01 racers

Post  Raymond on Sat May 23, 2009 8:56 am

yip and those bearings don't clean themselves either. Good thread, send more tips and do's and don'ts.

Raymond

Posts: 2518
Join date: 2008-08-19
Location: Port Elizabeth

View user profile http://www.raymonds-rc-models.co.za

Back to top Go down

Re: Newly TT01 racers

Post  ototw on Sat May 23, 2009 7:31 pm

en as jou voet seer is ,kom kyk ten minste

ototw

Posts: 1763
Join date: 2008-10-12
Age: 45

View user profile

Back to top Go down

Re: Newly TT01 racers

Post  ototw on Sat May 23, 2009 7:32 pm

I wish EYE was a pig on a BMX

ototw

Posts: 1763
Join date: 2008-10-12
Age: 45

View user profile

Back to top Go down

Re: Newly TT01 racers

Post  Raymond on Sat May 23, 2009 7:37 pm

wat van a pig on a forklift?

Raymond

Posts: 2518
Join date: 2008-08-19
Location: Port Elizabeth

View user profile http://www.raymonds-rc-models.co.za

Back to top Go down

Re: Newly TT01 racers

Post  Raymond on Sat May 23, 2009 7:37 pm

waar is al die emoticons wat gewoonlik op kom?

Raymond

Posts: 2518
Join date: 2008-08-19
Location: Port Elizabeth

View user profile http://www.raymonds-rc-models.co.za

Back to top Go down

emonicon

Post  ototw on Sat May 23, 2009 8:08 pm

vra vir sucy fucy

ototw

Posts: 1763
Join date: 2008-10-12
Age: 45

View user profile

Back to top Go down

Re: Newly TT01 racers

Post  Raymond on Sun May 24, 2009 9:14 am

another tip for newbies: stay away from the 60mm black pvc pipes. Try to keep the car in the middle of the track until you are good enough to ride proper racing lines. It might save you some bucks

Raymond

Posts: 2518
Join date: 2008-08-19
Location: Port Elizabeth

View user profile http://www.raymonds-rc-models.co.za

Back to top Go down

Re: Newly TT01 racers

Post  ototw on Sun May 24, 2009 10:07 am

and the effort to fit r/f wheelhubs,

ototw

Posts: 1763
Join date: 2008-10-12
Age: 45

View user profile

Back to top Go down

Re: Newly TT01 racers

Post  Raymond on Mon May 25, 2009 9:19 pm

good point, rather spend bucks on tyres than fixing broken bits

Raymond

Posts: 2518
Join date: 2008-08-19
Location: Port Elizabeth

View user profile http://www.raymonds-rc-models.co.za

Back to top Go down

Re: Newly TT01 racers

Post  ototw on Mon May 25, 2009 10:42 pm

but if you do need broken bits,go to 60A Newton Street,that shop has it all,just 4 u

ototw

Posts: 1763
Join date: 2008-10-12
Age: 45

View user profile

Back to top Go down

Re: Newly TT01 racers

Post  Raymond on Mon May 25, 2009 10:57 pm

i sell bicycle spares too, looks like yours have a wabble Laughing

Raymond

Posts: 2518
Join date: 2008-08-19
Location: Port Elizabeth

View user profile http://www.raymonds-rc-models.co.za

Back to top Go down

Re: Newly TT01 racers

Post  Michael on Tue May 26, 2009 8:32 pm

Raymond wrote:i sell bicycle spares too, looks like yours have a wabble Laughing

I need half a pedalle...

Michael

Posts: 289
Join date: 2009-05-19
Age: 38
Location: Port Elizabeth

View user profile

Back to top Go down

Re: Newly TT01 racers

Post  ototw on Tue May 26, 2009 8:48 pm

NO MAN THE CASTER LITTLE BIT OUT

ototw

Posts: 1763
Join date: 2008-10-12
Age: 45

View user profile

Back to top Go down

View previous topic View next topic Back to top


Post new topic   Reply to topic
Permissions of this forum:
You cannot reply to topics in this forum